Home      About Us      News Center     Enterprise Culture     Product Center     Quality Assurance     Service Commitemnt     Contact Us  
Insulator Rod
E-glass rod
ECR-glass rod
Pultrusion&winding rod
Insulation Pole
Custom Shapes
L Shape
Pultrusion rectangle shee
Rods with Copper Core
Pultrusion Tube
Square Tube
Winding Tube
Polyimide Laminated Sheet
Epoxy Sheet
Polyester Sheet
Insulation Paper
Insulating Board
Composite Core Cond
Loop insulator
  E-glass rod

1.Capacity: 100 Pultrusion lines, the largest manufacturer of composite insulator rods in China.

2.Technique: the only one using vacuum injection technique without mould release agent.
3.Test: Rods passed tests in domestic labs, including WHVRI,CEMT,XIHARI, especially passed KEMA tests in the Netherlands and 7200h stress corrosion test.
4.Standards: IEC, ASTM, GB,DL
5.Application: Rods operate in high voltage lines up to 1000kV.
1. Range: Diameter Ф5-Ф130 mm; Length 0-12.5 m
Based on properties, rods are classified into High temperature resistant type (E-glass Rod) and High temperature & acid resistant type (E-glass Rod).

Based on application, rods are classified into 7 types:
for composite suspension & tension insulators (Diameter Ф16—Ф40)
for composite pin insulators((Diameter Ф24---Ф53)
for composite cross arm insulators(Diameter Ф28—Ф80)
for composite post insulator (Diameter Ф28—Ф130)
for composite surge arresters(Diameter Ф5—Ф40)
for composite fuse cutout (Diameter Ф19—Ф36)
3. Color: Light green, brown, black
Highlight: Performance of our E-glass rods is higher than normal rods by 20%, suitable for application to all kinds of composite insulators manufacture techniques, especially to injection technique.

[Page 1] [Page 2] [Page 3] 
SHAANXI TAPOREL ELECTRICAL INSULATION TECHNOLOGY CO., LTD ADD: No.9 Jingwei 10th Road, Jinghe Industrial Zone, Xi’an, China
P.C:710204 Tel.:+86-29-86031628 86030283 86033628 86033566 86031923 86031636 Fax:+86-29-86031253
Http://www.taporel.com E-mail: info@taporel.com  24 Hours Service Hotline : +86-18792660323